SEIZE AIR at ITMA 2026: Low-Pressure Screw Compressors

Meet SEIZE AIR at ITMA 2026 to discuss low-pressure oil-injected screw compressors for textile production. We invite you to visit our two booths, H3 B01 and H5.1 B19. The full exhibition name is ITMA ASIA + CITME 2026.

We are hosting guests across two locations during ITMA ASIA + CITME 2026 from 20–24 November 2026. Visit H3 B01 or H5.1 B19 at the National Exhibition and Convention Centre (Shanghai). In other words, you can visit SEIZE AIR at either location.

Come share your upcoming facility adjustments and explore direct purchases of complete air compressor systems.

Low-pressure screw compressor portfolio photo for SEIZE AIR at ITMA 2026 invitation
SEIZE AIR low-pressure oil-injected screw compressor portfolio photo. The exact exhibition display lineup is not specified.

Essential Event Facts for Your Shanghai Visit

Planning your route through a large exhibition venue saves valuable time for your visiting delegation. Before you travel, keep these essential details handy as you organize your schedule for ITMA ASIA + CITME 2026:

  • Exhibition Name: ITMA ASIA + CITME 2026
  • Exhibitor: SEIZE AIR — Seize Compressor (Shanghai) Co., Ltd.
  • Event Dates: 20–24 November 2026
  • Venue: National Exhibition and Convention Centre (Shanghai)
  • SEIZE AIR Booth Locations: H3 B01 and H5.1 B19
  • Discussion Scope: Textile production requirements and complete compressor purchases
  • Product Focus: Low-pressure oil-injected screw compressors

As a result, your purchasing and engineering teams can choose the booth that fits their route.

Why Meet SEIZE AIR at ITMA 2026?

Major machinery exhibitions bring decision-makers and engineering teams together under one roof. When you meet SEIZE AIR at ITMA 2026, discuss compressed air alongside your textile machinery plans. SEIZE AIR is based in Shanghai.

In addition, we look forward to meeting textile industry visitors in our home city. Add either booth to your itinerary, depending on your route through the venue.

We would like to hear what your next production investment needs to achieve. For example, a conversation can connect a planned compressor purchase with your next production investment. Visitors can review official venue arrangements and schedule details through the ITMA ASIA + CITME 2026 event information page before arriving in Shanghai.

Evaluating Textile Production Changes Together

Every textile mill faces unique operational pressures as fabric orders and machinery layouts change. New machinery can change compressed air requirements. However, the effect depends on the equipment and its operating schedule.

Discussing these requirements early can help identify questions for your equipment suppliers. Sitting down with our team at ITMA ASIA + CITME 2026 lets you discuss those layout adjustments in a relaxed setting.

For example, your plant may be consolidating older compressor rooms into one station. Alternatively, you might be separating air networks to serve distinct production zones more effectively. These details help our team identify relevant product categories for further review.

You do not need finalized blueprints to start a productive conversation at H3 B01 or H5.1 B19. Instead, bring your questions, operating observations and expansion ideas for discussion.

Low-Pressure Oil-Injected Screw Compressors for Textile Projects

Low-pressure oil-injected screw compressors are the main product focus of this invitation. This is the category to discuss with our team if your textile process calls for low-pressure compressed air. However, final selection must follow your machinery supplier's requirements and the conditions at your mill.

Explore our SLVC low-pressure screw compressor series before the exhibition. Then bring your operating questions to the booth. Product photographs illustrate the relevant range; they do not confirm the machines assigned to either booth.

Start with the Required Pressure and Demand

First, identify the pressure needed at the production equipment. Also, explain where that requirement comes from. A machine specification and a compressor discharge reading describe different locations. Therefore, clarify the measurement point when discussing a purchase.

If your plant has several air networks, describe which production areas each network serves. For example, an expansion may change demand in one area while other lines remain unchanged. These details help keep the discussion specific to your project.

Include Air Treatment in the Discussion

Oil-injected compression and oil-free compression are different product categories. This invitation focuses on the former. However, the air reaching production equipment must still meet the process specification. Discuss moisture, oil and particle requirements together with the compressor purchase.

For example, our refrigerated air dryers provide a starting point for a drying discussion. Suitability depends on the required dew point and operating conditions. We do not assume that one treatment arrangement fits every textile process.

Connecting with Our Shanghai Team Before the Show

A short introduction before the show can help focus the conversation. At either H3 B01 or H5.1 B19, our team welcomes your questions. We welcome existing partners and textile producers meeting SEIZE AIR for the first time.

If your textile mill is preparing for equipment replacements or new line installations, let us talk in Shanghai.

You are welcome to reach out ahead of the November dates to introduce your project focus. Before the exhibition, visit our SEIZE AIR contact page to send a message to our team before traveling. Include your preferred day, booth and main questions.

As a result, the discussion has a useful starting point during ITMA ASIA + CITME 2026. Meet SEIZE AIR at ITMA 2026 at the National Exhibition and Convention Centre (Shanghai). We look forward to seeing you this November.

Frequently Asked Questions

Where Can I Meet SEIZE AIR at ITMA 2026?

Visitors can meet SEIZE AIR from 20–24 November 2026 at the National Exhibition and Convention Centre (Shanghai). Specifically, our two booth locations are H3 B01 and H5.1 B19.

Do I need a final compressor specification before visiting?

No. You can bring an early project brief or questions about an existing plant. Where possible, include your machinery air requirements and intended purchasing schedule.

However, final selection still needs the relevant operating conditions.