Seize Air Compressor

Permanent magnet variable frequency two-stage compression SVC series

PRODUCTS

Permanent magnet variable frequency two-stage compression SVC series

Feature: Screw block with single stage air compression Advantages: Low compression level Low temperature rise Low air leakage Integrated shaft (direct drive) Benefit: 5% energy saving Feature: IE4 Permanent Magnet Motor / WEG Brand High Efficiency IE4 Motor Optional oil cooled engine Advantages : Engine efficiency 97% Benefit: 5% energy saving

Product advantages

  • Feature
    Feature: Dual VFD System Benefits : Constant pressure output to eliminate pressure fluctuations and load shedding Constant outlet temperature at 80-85℃ Low inrush current to protect components Benefit: 15% energy savings
    01
  • Benefits
    Feature: Screw block with single stage air compression Advantages: Low compression level Low temperature rise Low air leakage Integrated shaft (direct drive) Benefit: 5% energy saving
    02
  • Advantages
    Feature: Dual VFD System Benefits : Constant pressure output to eliminate pressure fluctuations and load shedding Constant outlet temperature at 80-85℃ Low inrush current to protect components Benefit: 15% energy savings
    03

Technical Parameters

分页表格

SZ-20TPM~SZ-60TPM

New Model Maximum
     working pressure		 Capacity(FAD) Motor power Outlet
     pipe dia.		 Dimensions(mm) Weight
bar psig m³min cfm kw hp inch L w H kg
SZ-20TPM 4.5    65    1.0~3.9 35.3~137.7 15 20 G11/2 1550 980 1300 1000
5.5 80    0.9~3.5 31.8~123.6
6.5 94    0.8~3.2 28.2~113.0
7.5 109    0.7~3.0 24.7~105.9
8.5 123    0.7~2.9 24.7~102.4
10.5 152    0.6~2.4 21.2~84.7
12.5 181    0.5~2.0 17.7~70.6
SZ-25TPM 4.5    65    1.2~4.8 42.4~169.4 18.5 25 G11/2 1550 980 1300 1100
5.5 80    1.1~4.3 38.8~151.8
6.5 94    1.0~4.0 35.3~141.2
7.5 109    0.9~3.8 31.8~134.1
8.5 123    0.8~3.4 28.2~120.0
10.5 152    0.7~2.9 24.7~102.4
12.5 181    0.7~2.7 24.7~95.3
SZ-30TPM 4.5    65    1.6~6.4 56.5~225.9 22 30 G2 1700 1130 1430 1300
5.5 80    1.5~6.1 53.0~215.3
6.5 94    1.2~4.8 42.4~169.4 G11/2 1550 980 1300 1100
7.5 109    1.1~4.5 38.8~158.9
8.5 123    1.1~4.3 38.8~151.8
10.5 152    0.8~3.4 28.2~120.0
12.5 181    0.7~2.9 24.7~102.4
SZ-40TPM 4.5    65    2.1~8.8 74.1~310.7 30 40 G2 1700 1130 1430 1350
5.5 80    1.9~7.7 67.1~271.8
6.5 94    1.8~7.0 63.5~247.1
7.5 109    1.6~6.8 56.5~240.0
8.5 123    1.5~6.2 53.0~218.9
10.5 152    1.2~4.7 42.4~165.9 G11/2 1550 980 1300 1150
12.5 181    1.1~4.3 38.8~151.8
SZ-50TPM 4.5    65    2.6~10.3 91.8~363.6 37 50 G2 1850 1180 1430 1650
5.5 80    2.4~9.5 84.7~335.4
6.5 94    2.2~8.7 77.7~307.1 1700 1130 1430 1450
7.5 109    1.9~7.5 67.1~264.8
8.5 123    1.8~7.4 63.5~261.2
10.5 152    1.5~6.0 53.0~211.8
12.5 181    1.4~5.6 49.4~197.7
SZ-60TPM 4.5    65    3.3~13.1 116.5~462.4 45 60 G21/2 2250 1370 1700 2100
5.5 80    2.9~11.5 102.4~405.9
6.5 94    2.4~10.5 84.7~370.6 G2 1850    1180    1430    2000   
7.5 109    2.3~10.0 81.2~353.0 1700 1130 1460 1700
8.5 123    2.2~8.6 77.7~303.6
10.5 152    1.9~7.5 67.1~264.8
12.5 181    1.6~6.4 56.5~225.9

SZ-75TPM~SZ-175TPM

New Model Maximum
     working pressure		 Capacity (FAD) Motor power Outlet
     pipe dia		 Dimensions(mm) Weight
bar psig m³/min cfm kw hp inch L w H kg
SZ-75TPM
     (W)		 4.5    65    3.9~15.5 137.7~547.2 55 75 G21/2 2250
     (2300)		 1370
     (1500)		 1700
     (1750)		 2200
     (2200)
5.5 80    3.4~14.5 120.0~511.9
6.5 94    3.2~13.3 113.0~469.5
7.5 109    3.0~13.1 105.9~462.4
8.5 123    2.8~12.3 98.8~434.2
10.5 152    2.3~10.1 81.2~356.5
     81.2~317.7		 G2 1850
     (1800)		 1180
     (1320)		 1430
     (1370)		 2000
     (2000)
12.5 181    2.3~9.0
SZ-100TPM
     (W)		 4.5    65    4.2~20.7 148.3~730.7 75 100 DN65 2450
     (2750)		 1670
     (1780)		 1740
     (1950)		 2600
     (3000)
5.5 80    4.8~19.0 169.4~670.7
6.5 94    4.5~17.5 158.9~617.8 DN65 2300
     (2300)		 1670
     (1500)		 1690
     (1750)		 2400
     (2400)
7.5 109    4.2~16.6 148.3~586.0
8.5 123    3.8~15.6 134.1~550.7
10.5 152    3.4~13.6 120.0~480.1 G21/2 2250
     (2300)		 1370
     (1500)		 1700
     (1750)		 2300
     (2400)
12.5 181    2.9~11.5 102.4~406.0
SZ-120TPM
     (W)		 4.5    65    6.4~25.6 225.9~903.7 90 120 DN100 2900
     (2900)		 1940
     (1940)		 1950
     (1950)		 4000
     (4000)
5.5 80    5.9~23.6 208.3~833.1 DN80 2750
     (2750)		 1780
     (1780)		 1950
     (1950)		 3300
     (3700)
6.5 94    5.6~21.5 197.7~759.0
7.5 109    5.3~20.8 187.1~734.2
8.5 123    4.9~20.0 173.0~706.0
10.5 152    4.1~16.3 144.7~575.4 DN65 2300
     (2300)		 1670
     (1500)		 1690
     (1750)		 2600
     (3200)
12.5 181    3.9~15.3 137.7~540.1
SZ-150TPM
     (W)		 4.5    65    7.7~30.0 271.8~1059.0 110 150 DN100 2900
     (2900)		 1940
     (1940)		 1950
     (1950)		 4100
     (3800)
5.5 80    7.2~28.2 254.2~995.5
6.5 94    6.7~26.6 236.5~939.0
7.5 109    6.1~24.5 215.3~864.9 DN80 2750
     (2750)		 1780
     (1780)		 1950
     (1950)		 3800
     (3400)
8.5 123    5.8~23.5 204.7~829.6
10.5 152    5.1~20.1 180.0~709.5
12.5 181    4.4~17.3 155.3~610.7
SZ-160TPM
     (W)		 4.5    65    8.8~35.0 310.6~1235.5 120 160 DN125 2930
     (3250)		 1900
     (1950)		 2060
     (2150)		 4600
     (4600)
5.5 80    7.9~30.0 278.9~1059.0 DN100 2900
     (2900)		 1940
     (1940)		 1950
     (1950)		 4200
     (3900)
6.5 94    7.2~28.2 254.2~995.5
7.5 109    6.5~26.0 229.5~917.8
8.5 123    6.1~24.8 215.3~875.4
10.5 152    5.6~22.9 197.7~808.4 DN80 2750
     (2750)		 1780
     (1780)		 1950
     (1950)		 4000
     (3600)
12.5 181    4.7~19.2 165.9~677.8
SZ-175TPM
     (W)		 4.5    65    9.6~38.3 338.9~1352.0 132 175 DN125 2930
     (3250)		 1900
     (1950)		 2060
     (2150)		 4800
     (4800)
5.5 80    8.8~35.0 310.6~1235.5
6.5 94    7.8~33.0 275.3~1164.9
7.5 109    7.2~30.0 254.2~1059.0 DN100 2900
     (2900)		 1940
     (1940)		 1950
     (1950)		 4300
     (4000)
8.5 123    6.9~28.0 243.6~988.4
10.5 152    6.1~24.1 215.3~850.7
12.5 181    5.4~21.3 190.6~751.9

SZ-200TPM~SZ-300TPM

New Model Maximum
     working pressure		 Capacity(FAD) Motor power Outlet
     pipe dia		 Dimensions(mm) Weight
bar psig m³min cfm kw hp inch L w H kg
SZ-200TPM
     (W)		 4.5    65    10.5~42.0 370.7~1482.6 150 200 DN125 3250
     (3250)		 1950
     (1950)		 2150
     (2150)		 5000
     (5500)
5.5 80    9.6~38.3 338.9~1352.0
6.5 94    8.8~35.0 310.6~1235.5
7.5 109    8.1~33.0 285.9~1164.9
8.5 123    7.4~30.0 261.2~1059.0 DN100 2900
     (2900)		 1940
     (1940)		 1950
     (1950)		 4100
     (4300)
10.5 152    6.5~28.0 229.5~988.4
12.5 181    6.1~24.3 215.3~857.8
SZ-215TPM
     (W)		 4.5    65    11.0~44.0 388.3~1553.2 160 215 DN125 3250
     (3250)		 1950
     (1950)		 2150
     (2150)		 5000
     (5000)
5.5 80    10.5~42.0 370.7~1482.6
6.5 94    9.6~38.3 338.9~1352.0
7.5 109    8.8~35.0 310.6~1235.5
8.5 123    8.1~33.0 285.9~1164.9
10.5 152    7.7~30.0 271.8~1059.0 DN100 2900
     (2900)		 1940
     (1940)		 1950
     (1950)		 4500
     (4100)
12.5 181    6.5~26.3 229.5~928.4
SZ-250TPM
     (W)		 4.5    65    12.7~50.0 448.3~1765.0 185 250 DN125 3500
     (3500)		 2250
     (2100)		 2300
     (2400)		 6200
     (6400)
5.5 80    11.5~46.0 406.0~1623.8 3250
     (3250)		 1950
     (1950)		 2150
     (2150)		 5400
     (6200)
6.5 94    11.0~44.0 388.3~1553.2
7.5 109    10.7~42.0 377.7~1482.6
8.5 123    10.3~40.0 363.6~1412.0
10.5 152    8.8~35.5 310.6~1253.2
12.5 181    7.5~32.4 264.8~1143.7
SZ-270TPM
     (W)		 4.5    65    13.7~55.0 483.6~1941.5 200 270 DN150 3800
     (3800)		 2300
     (2300)		 2400
     (2400)		 7600
     (7300)
5.5 80    12.5~50.0 441.3~1765.0 DN125 3500
     (3500)		 2250
     (2100)		 2300
     (2400)		 6200
     (6000)
6.5 94    11.5~46.0 406.0~1623.8
7.5 109    11.0~44.0 388.3~1553.2
8.5 123    10.5~42.0 370.7~1482.6
10.5 152    9.7~38.6 342.4~1362.6
12.5 181    8.2~33.0 289.5~1164.9
SZ-300TPM
     (W)		 4.5    65    15.3~61.0 540.1~2153.3 220 300 DN150 3500
     (3800)		 2100
     (2300)		 2400
     (2400)		 7800
     (7500)
5.5 80    13.7~55.0 483.6~1941.5
6.5 94    12.7~51.0 448.3~1800.3
7.5 109    12.4~49.6 437.7~1750.9 DN125 3500
     (3500)		 2250
     (2100)		 2300
     (2400)		 6400
     (6200)
8.5 123    11.5~46.0 406.0~1623.8
10.5 152    10.3~41.2 363.6~1454.4
12.5 181    9.5~38.1 335.4~1344.9

SZ-340TPM~SZ-500TPM

New Model Maximum
     working pressure		 Capacity(FAD) Motor power Outlet
     pipe dia		 Dimensions(mm) Weight
bar psig m³min cfm kw hp inch L w H kg
SZ-340TPM
     (W)		 4.5    65    16.3~65.0 575.4~2294.5 250 340 DN150 3800
     (3800)		 2300
     (2300)		 2400
     (2400)		 8000
     (7300)
5.5 80    15.3~61.0 540.1~2153.3
6.5 94    15.0~60.0 529.5~2118.0
7.5 109    13.8~55.3 487.1~1952.1
8.5 123    13.3~51.0 469.4~1800.3
10.5 152    11.7~46.0 413.0~1623.8 DN125 3500
     (3500)		 2250
     (2100)		 2300
     (2400)		 6600
     (6400)
12.5 181    10.3~41.2 363.6~1454.4
SZ-375TPM
     (W)		 4.5    65    19.2~76.9 677.8~2714.6 280 375 DN200 4300
     (4000)		 2400
     (2400)		 2600
     (2650)		 8800
     (8500)
5.5 80    17.8~71.0 628.3~2506.3 DN150 3800
     (3800)		 2300
     (2300)		 2400
     (2400)		 8100
     (7800)
6.5 94    16.2~65.0 571.9~2294.5
7.5 109    15.1~60.5 533.0~2135.7
8.5 123    14.1~56.5 497.7~1994.5
10.5 152    12.8~51.0 451.8~1800.3
12.5 181    11.6~46.0 409.5~1623.8
SZ-400TPM
     (W)		 4.5    65    20.6~82.5 727.2~2912.3 300 400 DN200 4300
     (4000)		 2400
     (2400)		 2600
     (2650)		 9000
     (8700)
5.5 80    19.2~76.8 677.8~2711.0
6.5 94    17.7~70.9 624.8~2502.8 DN150 3800
     (3800)		 2300
     (2300)		 2400
     (2400)		 8300
     (8000)
7.5 109    16.2~65.0 571.9~2294.5
8.5 123    15.0~60.3 529.5~2128.6
10.5 152    14.1~56.5 497.7~1994.5
12.5 181    12.8~51.5 451.8~1818.0
SZ-440TPM
     (W)		 4.5    65    21.3~85.5 751.9~3018.2 330 440 DN200 4300
     (4000)		 2400
     (2400)		 2600
     (2650)		 9300
     (8000)
5.5 80    20.6~82.4 727.2~2908.7
6.5 94    19.2~76.7 677.8~2707.5
7.5 109    17.7~70.7 624.8~2495.7 DN150 3800
     (3800)		 2300
     (2300)		 2400
     (2400)		 8600
     (8300)
8.5 123    16.2~65.0 571.9~2294.5
10.5 152    15.0~60.2 529.5~2125.1
12.5 181    14.1~56.5 497.7~1994.5
SZ-475TPM 4.5    65    41.2~101.3 1454.4~3575.9 355 475 DN200 4600 2400 2650 12500
5.5 80    37.4~93.7 1320.2~3307.6
6.5 94    32.9~82.3 1161.4~2905.2 DN150 4000 2400 2650 11200
7.5 109    31.2~76.6 1101.4~2703.0
8.5 123    28.2~70.6 995.5~2492.2
10.5 152    26.3~65.8 928.4~2322.7 DN150 4000 2400 2500 10000
12.5 181    24.6~61.6 868.4~2174.5
SZ-500TPM – – 　 　 375 500 – – 　 – –
5.5 80    41.0~101.1 1447.3~3568.8 DN200 4600 2400 2650 12900
6.5 94    37.4~93.5 1320.2~3300.5
7.5 109    32.9~82.2 1161.4~2901.7 DN150 4000 2400 2650 11600
8.5 123    31.2~76.5 1101.4~2700.5
10.5 152    28.1~70.3 991.9~2481.6 3800 2400 2500 10400
12.5 181    26.2~65.5 924.9~2312.2

Free air supply for the entire assembly in accordance with ISO 1217, Annex E, at an ambient temperature of 20 °C and an absolute inlet pressure of 1 bar
Sound pressure values from 64 dB(A) according to DIN EN ISO 2151:2009
Specifications are subject to change

退出移动版