PRODUCTS

Water lubrication single-stage compression frequency conversion series

Feature: Screw block with single stage air compression
Advantages: Low compression level Low temperature rise Low air leakage Integrated shaft (direct drive) Benefit: 5% energy saving Feature: IE4 Permanent Magnet Motor / WEG Brand High Efficiency IE4 Motor Optional oil cooled engine Advantages : Engine efficiency 97% Benefit: 5% energy saving

Quick Quote

Consulting

Facebook

Product advantages

Feature
Feature: Dual VFD System Benefits : Constant pressure output to eliminate pressure fluctuations and load shedding Constant outlet temperature at 80-85℃ Low inrush current to protect components Benefit: 15% energy savings
01
Benefits
Feature: Screw block with single stage air compression Advantages: Low compression level Low temperature rise Low air leakage Integrated shaft (direct drive) Benefit: 5% energy saving
02
Advantages
Feature: Dual VFD System Benefits : Constant pressure output to eliminate pressure fluctuations and load shedding Constant outlet temperature at 80-85℃ Low inrush current to protect components Benefit: 15% energy savings
03

Technical Parameters

Model	Maximum Working Pressure		DURATION		KW Motor Power	dB noise	Cooling water inlet and outlet diameter	Cooling Water Inlet Water Temperature-Desaturation 32%	coolant L	Dimensiones LWH mm	Weight kg	Inch air outlet
	bar	psig	m³/min	cfm
SW-06A/W	8	116	0.78	27.5	5.5	58	3/4″	1.5	10	800X800X1200	430	3/4″
	10	145	0.65	21.18
SW-08A/W	8	116	1.15	40.6	7.5	58	3/4″	2	10	800X800X1200	470	3/4″
	10	145	1.02	36
	12.5	181	0.81	28.6
SW-11A/W	8	116	1.55	54.7	11	60	1″	2.5	26	1150X755X1340	580	3/4″
	10	145	1.32	46.6
	12.5	181	1.01	35.7
SW-15A/W	8	116	2.30	81.2	15	63	1″	3.5	26	1150X755X1340	650	3/4″
	10	145	2.12	74.8
	12.5	181	1.60	56.5
SW-18A/W	8	116	3.10	109.4	18.5	65	1″	4	30	1400X900X1450	705	1″
	10	145	2.62	92.5
	12.5	181	2.10	74.1
SW-22A/W	8	116	3.42	120.7	22	65	1″	5	30	1400X900X1450	745	1″
	10	145	3.15	111.2
	12.5	181	2.62	92.5
SW-30A/W	8	116	5.05	178.3	30	67	1 1/2″	7	40	1550X1150X1550(A)	1100	1 1/4″
	10	145	4.20	148.3
	12.5	181	3.18	112.3						1500X1150X1300(W)
SW-37A/W	8	116	6.10	215.3	37	67	1 1/2″	9	40	1550X1150X1550(A)	1150	1 1/4″
	10	145	5.25	185.3
	12.5	181	4.85	171.2						1500X1150X1300(W)
SW-45A/W	8	116	7.60	268.3	45	68	1 1/2″	10	90	1980X1300X1760(A)	1390	2″
	10	145	6.15	217.1
	12.5	181	5.65	199.4						1800X1300X1680(W)
SW-55A/W	8	116	9.60	338.9	55	70	1 1/2″	12	120	1980X1300X1760(A)	1470	2″
	10	145	8.55	301.8
	12.5	181	7.45	263.0						1800X1300X1680(W)
SW-75A/W	8	116	13.00	458.9	75	73	1 1/2″	18	120	2100X1600X2000(A)	2250	2″
	10	145	11.42	403.1
	12.5	181	9.85	347.7						2200X1500X1800(W)	1630
SW-90A/W	8	116	16.25	573.6	90	73	1 1/2″	20	180	2400X1600X2000(A	2650	2 1/2″
	10	145	14.55	513.6
	12.5	181	12.30	434.2						2200X1550X1800(W)	2350
SW-110A/W	8	116	19.50	688.4	110	78	2″	24	180	3000X1700X2250(A)	3150	2 1/2″
	10	145	16.80	593.0
	12.5	181	15.15	534.8						2200X1550X1800(W)	2460
SW-132A/W	8	116	22.52	795.0	132	78	2″	30	240	3000X1700X2250(A)	3500	2 1/2″
	10	145	20.30	716.6
	12.5	181	18.25	644.2						2200X1550X1800(W)	2500
SW-160W	8	116	28.11	992.3	160	80	3″	35	240	2700X1800X2050	3700	DN80
	10	145	24.50	864.9
	12.5	181	22.15	781.9
SW-185W	8	116	33.65	1187.8	185	80	3″	38	300	2700X1800X2050	3750	DN80
	10	145	28.5	1006.1
	12.5	181	24.5	864.9
SW-200W	8	116	36.63	1293.0	200	80	4″	42	300	2700X1800X2050	3900	DN100
	10	145	32.75	1156.1
	12.5	181	27.50	970.8
SW-220W	8	116	39.50	1394.4	220	80	4″	47	360	2700X1800X2050	4200	DN100
	10	145	35.80	1263.7
	12.5	181	29.50	1041.4
SW-250W	8	116	40.50	1429.7	250	80	4″	58	360	2700X1800X2050	4600	DN100
	10	145	36.30	1281.4
	12.5	181	32.50	1147.3

Note: air and water cooling.

Variable frequency technical parameters

Model	Maximum Working Pressure		DURATION		KW Motor Power	dB noise	Cooling water inlet and outlet diameter	Cooling Water InletWater Temperature-Desaturation 32%	coolant L	Dimensiones LWH mm	Weight kg	Inch air outlet
	bar	psig	m³/min	cfm
SWVC-06A/W	8	145	0.3-0.78	10.6-27.5	5.5	58	3/4″	1.5	10	800X800X1200	460	3/4″
	10	145	0.2-0.65	7.1-22.9
SWVC-08A/W	8	116	0.35-1.15	12.4-40.6	7.5	58	3/4″	2	10	800X800X1200	510	3/4″
	10	145	0.3-1.02	10.6-36.0
	12.5	181	0.24-0.81	8.5-28.6
SWVC-11A/W	8	116	0.54-1.55	19.1-54.7	11	60	1″	2.5	26	1150X755X1340	620	3/4″
	10	145	0.45-1.32	15.9-46.6
	12.5	181	0.35-1.01	12.4-35.7
SWVC-15A/W	8	116	0.75-2.30	26.5-81.2	15	63	1*	3.5	26	1150X755X1340	670	3/4″
	10	145	0.65-2.12	22.9-74.8
	12.5	181	0.6-1.60	21.2-56.5
SWVC-18A/W	8	116	0.9-3.10	31.8-109.4	18.5	65	1″	4	30	1400X900X1450	730	1″
	10	145	0.9-2.62	31.8-92.5
	12.5	181	0.6-2.10	21.2-74.1
SWVC-22A/W	8	116	1.1-3.42	38.8-120.7	22	65	1″	5	30	1400X900X1450	780	1″
	10	145	0.97-3.15	34.2-111.2
	12.5	181	0.85-2.62	30.0-92.5
SWVC-30A/W	8	116	1.55-5.05	54.7-178.3	30	67	1 1/2″	7	40	1550X1150X-1550(A)	1150	1 1/4″
	10	145	1.26-4.20	44.5-148.3
	12.5	181	1.10-3.18	38.8-112.3						1500X1150X-1300(W)
SWVC-37A/W	8	116	1.91-6.10	67.4-215.3	37	67	1 1/2″	9	40	1550X1150X-1550(A)	1200	1 1/4″
	10	145	1.60-5.25	56.5-185.3
	12.5	181	1.42-4.85	50.1-171.2						1500X1150X-1300(W)
SWVC-45A/W	8	116	2.50-7.60	88.3-268.3	45	68	1 1/2″	10	90	1980X1300X-1760(A)	1490	2″
	10	145	1.91-6.15	67.4-217.1
	12.5	181	1.70-5.65	60.0-199.4						1800X1300X-1680(W)

Model	Maximum Working Pressure		DURATION		KW Motor Power	dB noise	Cooling water inlet and outlet diameter	Cooling Water Inlet Water Temperature-Desaturation 32%	coolant L	Dimensiones LWH mm	WeiWeight kg	Inch air outlet
	bar	psig	m³/min	cfm
SWVC-55A/W	8	116	3.0-9.60	105.9-338.9	55	70	1 1/2″	12	120	1980X1300X-1760(A)	1570	2″
	10	145	2.56-8.55	90.4-301.8
	12.5	181	2.30-7.45	81.2-263.0						1800X1300X-1680(W)
SWVC-75A/W	8	116	3.95-13.00	139.4-458.9	75	73	1 1/2″	18	120	2100X1600X-2000(A)	2250	2″
	10	145	3.40-11.42	120.0-403.1
	12.5	181	3.0-9.85	105.9-347.7						2200X1500X-1800(W)	1750
SWVC-90A/W	8	116	5.0-16.25	176.5-573.6	90	73	1 1/2″	20	180	2400X1600X-2000(A)	3150	2 1/2″
	10	145	4.30-14.55	151.8-513.6
	12.5	181	3.72-12.30	131.3-434.2						2200X1550X-1800(W)	2450
SWVC-110A/W	8	116	6.0-19.50	211.8-688.4	110	78	2″	24	180	3000X1700X-2250(A)	3150	2 1/2″
	10	145	5.07-16.80	179.0-593.0
	12.5	181	4.65-15.15	164.1-534.8						2200X1550X-1800(W)	2580
SWVC-132A/W	8	116	6.75-22.52	238.3-795.0	132	78	2″	30	240	3000X1700X-2250(A)	3500	21/2″
	10	145	6.0-20.30	211.8-716.6
	12.5	181	5.07-18.25	179.0-644.2						2200X1550X-1800(W)	2700
SWVC-160A/W	8	116	8.5-28.11	300.1-992.3	160	80	3″	35	240	2700X1800X2050	3900	DN80
	10	145	7.6-24.50	268.3-864.9
	12.5	181	6.7-22.15	236.5-781.9
SWVC-185W	8	145	10-33.65	353.0-1187.8	185	80	3″	38	300	2700X1800X2050	4050	DN80
	10	145	8.72-28.5	307.8-1006.1
	12.5	181	7.75-24.5	273.6-864.9
SWVC-200W	8	116	11.2-36.63	395.4-1293.0	200	80	4″	42	300	2700X1800X2050	4200	DN100
	10	145	9.68-32.75	341.7-1156.1
	12.5	181	9.2-27.50	324.8-970.8
SWVC-220W	8	116	12.2-39.50	430.7-1394.4	220	80	4″	47	360	2700X1800X2050	4400	DN100
	10	145	11.2-35.80	395.4-1263.7
	12.5	181	9.0-29.50	317.7-1041.4
SWVC-250W	8	116	13.5-40.50	476.6-1429.7	250	80	4″	58	360	2700X1800X2050	4800	DN100
	10	145	12.3-36.30	434.2-1281.4
	12.5	181	10.2-32.50	360.1-1147.3

Application Area

Food industry, such as transportation, filling, packaging, and other processes.
In the medical field, gas is used in medicines, vaccines, etc., especially in hospitals.
In the textile industry, compressed air can affect the quality and hygiene of fabrics.
Process requirements such as the high-precision instrument industry and board manufacturing.
Laboratory applications, analytical tests, chemical tests, etc.